How to Hang Pegboard
Pegboard is a great way to keep your shed, workshop or garage walls organized. Available in an array of styles and finishes, pegboard is easy to install and customize. Learn how to hang pegboard in this video by The Home Depot:
You will need the following:
Tools:
- Measuring tape
- Circular saw
- Eye protection
- Ear protection
- Drill
- Standard level
- Stud finder
- Pencil
Materials:
- Pegboard
- Hooks and hanging accessories
- 3/4-inch wood screws
- 3-inch wood or drywall screws
- 1×2-inch furring strips
- Varnish or exterior primer and paint (optional)
- Wall anchors (optional)
1. Measure wall space: Determine the size and shape of pegboard you’ll need by measuring the area. Jot down the vertical and horizontal measurements so that you’ll have it handy when it’s time to finalize your materials list. If your space has drywall, plan on purchasing 1×2-inch furring strips. Furring strips create a gap between the pegboard and wall, so hooks and accessories will fit into the holes correctly. You’ll need two furring strips for the horizontal edges and one for every wall stud you cross during installation. If your space has exposed framing, attach the pegboard directly to the studs.
2. Cut and paint materials: At least 1/4-inch thick pegboard is recommended for strength. If you’re going with a tempered hard board version of pegboard, you can cut it to your exact dimensions using a jigsaw or circular saw. Just make sure you place the front face down while cutting to keep the pegboard clean. When hanging pegboard in a damp space, seal both sides with varnish or primer and exterior paint before installation ro prevent swelling or warping.
3. Prepare to hang pegboard: Using a stud finder and pencil, mark the location of the studs on the wall, then attach the furring strips to the studs using 3/4-inch wood screws (do not attach the wood screws using the pre-drilled holes of the pegboard). If your pegboard placement doesn’t allow for direct stud attachment, use drywall anchors to secure the furring strips.
4. Install and accessorize: To install the pegboard, have a friend hold it up in position over the furring strips. Once level, drive in 3-inch wood or drywall screws through the pegboard at all four corners and ideally into the furring strips. Install drywall anchors if necessary. To frame the pegboard, use picture frame molding or 1×2-inch boards cut to fit the perimeter, than attach using wood screws. Test the pegboard’s connection and tighten the screws if necessary. Then load up your new pegboard with hooks, tool racks and storage accessories. Be sure to use thicker hooks when hanging heavier items like drills and saws.
